Lesson 20: Introduction to Arrays and Classes

An Array of Objects

Introduction

You can create an array of values where each member of the array is based on a formal class. Of course, you must have a class first. You can use one of the already available classes of the .NET Framework or you can create your own class. Here is an example of such a class:

public enum EmploymentStatus
{
    FullTime,
    PartTime,
    Unknown
}

public class Employee
{
    public long EmployeeNumber     { get; set; }
    public string EmployeeName     { get; set; }
    public EmploymentStatus Status { get; set; }
    public double HourlySalary     { get; set; }
}

Practical Learning: Introducing Arrays and Classes

Start Microsoft Visual Studio and create a Windows Forms application named CountriesStatistics5
On the main menu, click Project -> Add New Item...
In the left list, under Visual C# Items, click Code
In the middle list, click Interface
Change the file name to Abbreviated
Press Enter

Change the document as follows:

namespace CountriesStatistics5
{
    public interface IAbbreviated
    {
        string Abbreviation { get; set; }
    }
}

In the Solution Explorer, right-click CountriesStatistics5 -> Add -> Class...
Change the file Name to GovernmentEntity
Click Add

Create a string-based property as follows:

namespace CountriesStatistics5
{
    public abstract class GovernmentEntity
    {
        public virtual string StateName { get; set; }
        public virtual int AreaSqrKms   { get; set; }
        public virtual string Capital   { get; set; }
    }
}

In the Solution Explorer, right-click CountriesStatistics5 -> Add -> Class...
Change the file name to State
Click Add

Change the class as follows:

namespace CountriesStatistics5
{
    public class State : GovernmentEntity,
                            IAbbreviated
    {
        public string Abbreviation { get; set; }
    }
}

In the Solution Explorer, double-click Form1.cs

Design the form as follows:

Introducing Arrays and Classes

Control	(Name)	Text	TextAlign
Label		United Mexican States	Font: Georgia, 20.25pt, style=Bold
Label		_______________________
ListView	lvwStates		View: Details GridLines: True FullRowSelect: True Anchor: Top, Bottom, Left, Right

List View Columns

(Name)	Text	TextAlign	Width
colNumber	#		25
colAbbreviation	Abbrv	Center
colStateName	State Name		125
colAreaSqrKms	Area (Sqr Kms)	Right	90
colCapital	Capital		100

Right-click the form and click View Code

Creating an Array of Objects

To create a list of objects, you can declare an array variable and use the square brackets to specify its size. Here is an example:

using System;
using static System.Console;

public class Exercise
{
    public static int Main(string[] args)
    {
        Employee[] staffMembers = new Employee[3];
        
        return 0;
    }
}

public enum EmploymentStatus { FullTime, PartTime, Unknown }

public class Employee
{
    public long EmployeeNumber     { get; set; }
    public string EmployeeName     { get; set; }
    public EmploymentStatus Status { get; set; }
    public double HourlySalary     { get; set; }
}

You can also use the var or the dynamic keyword to create the array but omit the first square brackets. Here are examples:

using System;
using static System.Console;

public class Exercise
{
    public static void Main(string[] args)
    {
        var staffMembers = new Employee[8];
    	dynamic contractors = new Employee[5];
    }
}

Practical Learning: Creating an Array of Objects

In the document, declare an array variable as follows:

using System.Windows.Forms;

namespace CountriesStatistics5
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();

            State[] states = new State[6];
        }
    }
}

Initializing an Array of Objects

If you create an array of objects, you can then access each member using its index, allocate memory for it using the new operator, then access each of its fields or properties, still using its index, to assign it the desired value. Here is an example:

using System;
using static System.Console;

public class Exercise
{
    public static int Main(string[] args)
    {
        Employee[] staffMembers = new Employee[3];

        staffMembers[0] = new Employee();
        staffMembers[0].EmployeeNumber = 20204;
        staffMembers[0].EmployeeName = "Harry Fields";
        staffMembers[0].Status = EmploymentStatus.FullTime;
        staffMembers[0].HourlySalary = 16.85;

        staffMembers[1] = new Employee();
        staffMembers[1].EmployeeNumber = 92857;
        staffMembers[1].EmployeeName = "Jennifer Almonds";
        staffMembers[1].Status = EmploymentStatus.FullTime;
        staffMembers[1].HourlySalary = 22.25;

        staffMembers[2] = new Employee();
        staffMembers[2].EmployeeNumber = 42963;
        staffMembers[2].EmployeeName = "Sharon Culbritt";
        staffMembers[2].Status = EmploymentStatus.PartTime;
        staffMembers[2].HourlySalary = 10.95;

        return 1;
    }
}

As an alternative, you can initialize each member of the array when creating it. To do this, you may need a constructor that takes each member you want to initialize, as argument. Here is an example of such a constructor:

public enum EmploymentStatus
{
    FullTime,
    PartTime,
    Unknown
};

public class Employee
{
    public long EmployeeNumber     { get; set; }
    public string EmployeeName     { get; set; }
    public EmploymentStatus Status { get; set; }
    public double HourlySalary     { get; set; }

    public Employee(long number, string name,
                    EmploymentStatus emplStatus, double salary)
    {
        EmployeeNumber = number;
        EmployeeName = name;
        Status = emplStatus;
        HourlySalary = salary;
    }
}

To initialize an object, before the semi-colon of creating the array, open the curly brackets, allocate memory for each member and specify the value of each field or property. Here are examples:

Employee[] staffMembers = new Employee[]
{
    new Employee(20204, "Harry Fields", EmploymentStatus.FullTime, 16.85),
    new Employee(92857, "Jennifer Almonds", EmploymentStatus.FullTime, 22.25),
    new Employee(42963, "Sharon Culbritt", EmploymentStatus.PartTime, 10.95)
};

If using the var or the dynamic keyword and a constructor to initialize the array, you can omit calling the name of the class before the square brackets. Here is an example:

var staffMembers = new[]
{
    new Employee(20204, "Harry Fields", EmploymentStatus.FullTime, 16.85),
    new Employee(92857, "Jennifer Almonds", EmploymentStatus.FullTime, 22.25),
    new Employee(42963, "Sharon Culbritt", EmploymentStatus.PartTime, 10.95)
};

Practical Learning: Initializing an Array of Objects

To initialize the array, add the following code:

using System.Windows.Forms;

namespace CountriesStatistics5
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();

            State[] states = new State[6];

            states[0] = new State() { Abbreviation = "WA", StateName = "Western Australia", AreaSqrKms = 2529875, Capital = "Perth" };
            states[1] = new State() { Abbreviation = "SA", StateName = "South Australia", AreaSqrKms = 983482, Capital = "Adelaide" };
            states[2] = new State() { Abbreviation = "QLD", StateName = "Queensland", AreaSqrKms = 1730648, Capital = "Brisbane" };
            states[3] = new State() { Abbreviation = "NSW", StateName = "New South Wales", AreaSqrKms = 800642, Capital = "Sydney" };
            states[4] = new State() { Abbreviation = "VIC", StateName = "Victoria", AreaSqrKms = 227416, Capital = "Melbourne" };
            states[5] = new State() { Abbreviation = "TAS", StateName = "Tasmania", AreaSqrKms = 68401, Capital = "Hobart" };
        }
    }
}

Accessing the Members of an Array of Objects

Accessing an Object by Index

After creating and initializing the array, you can use it as you see fit. For example, you may want to display its values to the user. You can access any member of the array by its index, then use the same index to get its field(s) and consequently its (their) value(s). Here is an example:

using System;
using static System.Console;

public class Exercise
{
    public static int Main(string[] args)
    {
        Employee[] staffMembers = new Employee[]
        {
            new Employee(20204, "Harry Fields", EmploymentStatus.FullTime, 16.85),
            new Employee(92857, "Jennifer Almonds", EmploymentStatus.FullTime, 22.25),
            new Employee(42963, "Sharon Culbritt", EmploymentStatus.PartTime, 10.95)
        };

        Title = "Employee Record";

        WriteLine("Employee Record");
        WriteLine("------------------------------------");
        WriteLine("Employee #:    {0}", staffMembers[2].EmployeeNumber);
        WriteLine("Full Name:     {0}", staffMembers[2].EmployeeName);
        WriteLine(string.Format("Status:        {0}", staffMembers[2].Status));
        WriteLine($"Hourly Salary: {staffMembers[2].HourlySalary}");

        WriteLine("====================================");
        return 0;
    }
}

public enum EmploymentStatus { FullTime, PartTime, Unknown }

public class Employee
{
    public long EmployeeNumber     { get; set; }
    public string EmployeeName     { get; set; }
    public EmploymentStatus Status { get; set; }
    public double HourlySalary     { get; set; }

    public Employee(long number, string name,
                    EmploymentStatus emplStatus, double salary)
    {
        EmployeeNumber = number;
        EmployeeName = name;
        Status = emplStatus;
        HourlySalary = salary;
    }
}

This would produce:

Employee Record
------------------------------------
Employee #:    42963
Full Name:     Sharon Culbritt
Status:        PartTime
Hourly Salary: 10.95
====================================
Press any key to continue . . .

Once again, remember that the index you use must be between 0 (included) and the number of objects - 1. Otherwise, the application would throw an exception.

Looping to Access an Object

You can use a loop (while, do...while, or for) to access a member of the array using the member's index.

Practical Learning: Looping for an Array of Objects

To present the list of states, add the follow code:

using System.Windows.Forms;

namespace CountriesStatistics5
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();

            State[] states = new State[6];

            states[0] = new State() { Abbreviation = "WA", StateName = "Western Australia", AreaSqrKms = 2529875, Capital = "Perth" };
            states[1] = new State() { Abbreviation = "SA", StateName = "South Australia", AreaSqrKms = 983482, Capital = "Adelaide" };
            states[2] = new State() { Abbreviation = "QLD", StateName = "Queensland", AreaSqrKms = 1730648, Capital = "Brisbane" };
            states[3] = new State() { Abbreviation = "NSW", StateName = "New South Wales", AreaSqrKms = 800642, Capital = "Sydney" };
            states[4] = new State() { Abbreviation = "VIC", StateName = "Victoria", AreaSqrKms = 227416, Capital = "Melbourne" };
            states[5] = new State() { Abbreviation = "TAS", StateName = "Tasmania", AreaSqrKms = 68401, Capital = "Hobart" };

            ListViewItem lviState = null;

            for (int counter = 0; counter < states.Length - 1; counter++)
            {
                lviState = new ListViewItem((counter + 1).ToString());

                lviState.SubItems.Add(states[counter].Abbreviation);
                lviState.SubItems.Add(states[counter].StateName);
                lviState.SubItems.Add(states[counter].AreaSqrKms.ToString());
                lviState.SubItems.Add(states[counter].Capital);

                lvwCountry.Items.Add(lviState);
    }
}
    }
}

To execute the application, on the main menu, click Debug -> Start Without Debugging:
Close the forms and return to your programming environment

A Field as an Array

Introduction

Like a primitive type, an array of objects can be made a field of a class. You can primarily declare the array and specify its size. Here is an example:

public class CompanyRecords
{
    Employee[] employees = new Employee[12];
}

After doing this, you can then initialize the array from the index of each member. Alternatively, as we saw for field arrays of primitive types, you can declare the array in the body of the class, then use a constructor or another method of the class to allocate memory for it. Here is an example:

public class Employee
{

}

public class CompanyRecords
{
    Employee[] employees;

    public CompanyRecords()
    {
        employees = new Employee[12];
    }
}

Initializing a Field of Array Type

To initialize the array, remember that each member is an object whose memory must be allocated on the heap. Therefore, apply the new operator on each member of the array to allocate memory for it, and then initialize it. Here is an example:

public enum EmploymentStatus
{
    FullTime,
    PartTime,
    Unknown
};

public class Employee
{
    public long EmployeeNumber { get; set; }
    public string EmployeeName { get; set; }
    public EmploymentStatus Status { get; set; }
    public double HourlySalary { get; set; }
}

public class CompanyRecords
{
    Employee[] employees;

    public CompanyRecords()
    {
        employees = new Employee[2];

        employees[0] = new Employee();
        employees[0].EmployeeNumber = 70128;
        employees[0].EmployeeName = "Frank Dennison";
        employees[0].Status = EmploymentStatus.PartTime;
        employees[0].HourlySalary = 8.65;

        employees[1] = new Employee();
        employees[1].EmployeeNumber = 24835;
        employees[1].EmployeeName = "Jeffrey Arndt";
        employees[1].Status = EmploymentStatus.Unknown;
        employees[1].HourlySalary = 16.05;
    }
}

If the class used as field has an appropriate constructor, you can use it to initialize each member of the array. Here is an example:

public class CompanyRecords
{
    Employee[] employees;

    public CompanyRecords()
    {
	    employees = new Employee[]
	    {
            new Employee(70128, "Justine Hearson", EmploymentStatus.PartTime, 10.62),
            new Employee(24835, "Bertha Hack", EmploymentStatus.FullTime, 18.94),
            new Employee(70128, "Frank Dennison", EmploymentStatus.Seasonal, 12.48),
            new Employee(24835, "Jeffrey Arndt", EmploymentStatus.PartTime, 16.05),
	    };
    }
}

Using the Array

Once you have created and initialized the array, you can use it as you see fit, such as displaying its values to the user. You must be able to access each member of the array, using its index. Once you have accessed a member of the array, you can get to its fields.

Properties of Array Types

The Value of a Property from an Array

You can create a property in a class so that the property is an array. If you want to use a property that includes both a getter and a setter sections, you can use a field that was created as an array. Here is an example:

public class Region
{
    public string Designation { get; set; }
    public string Description { get; set; }
}

public class State
{
    private Region[] rgn;

    public Region[] Area
    {
        get
        {
            return rgn;
        }
        set
        {
            rgn = value;
        }
    }
}

Otherwise, you can create the property as an automatic one.

To specify the value of a property of array type, you can get an array member using its index and assign it to the desired member. Here are examples:

using System;
using static System.Console;

public class Exercise
{
    public static int Main(string[] args)
    {
        Region[] regions = new Region[]
        {
            new Region() { Designation = "East North Central" },
            new Region() { Designation = "East South Central" },
            new Region() { Designation = "New England"        }
        };

        State[] states = new State[]
        {
            new State() { Region = regions[1], Abbreviation = "KY", StateName = "Kentucky" },
            new State() { StateName = "Maine", Region = regions[2], AreaSqrMiles =  35387 },
            new State() { Capital = "Boston", StateName = "Massachusetts", Region = regions[2] },
            new State() { Abbreviation = "AL", Region = regions[1], StateName = "Alabama" },
            new State() { Region = regions[0], StateName = "Michigan", AreaSqrMiles = 98810 }
        };

        WriteLine("====================================");
        return 0;
    }
}

public class Region
{
    public string Designation { get; set; }
    public string Description { get; set; }
}

public class State
{
    internal Region Region;
    private Region[] rgn;

    public Region[] Area
    {
        get
        {
            return rgn;
        }
        set
        {
            rgn = value;
        }
    }

    public string Abbreviation { get; internal set; }
    public string StateName { get; internal set; }
    public int AreaSqrMiles { get; internal set; }
    public string Capital { get; set; }
}

A Property of an Array Type

A property can be an array type. In this case, the values of the property would be held by an array.

Practical Learning: Creating a Property of Array Type

In the Solution Explorer, double-click State and change it as follows:

namespace CountriesStatistics5
{
    public class State : GovernmentEntity, IAbbreviated
    {
        public string Abbreviation        { get; set; }
        public string[] SignificantCities { get; set; }
    }
}

Initializing a Property of Array Type

To initialize a property that is an array or to specify its value(s), you can create an array and assign it to the property. You can also create the array directly on the property. If the main class is used as an array, all properties can have the same number of values or each property can have a different number of values.

Practical Learning: Initializing the Properties of Array Type

Click the Form1.cs tab to access the code of the form and change it as follows:

using System.Windows.Forms;

namespace CountriesStatistics5
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();

            string[] WesternAustralia = new string[3]
            {
                "Perth", "Ellenbrook", "Geraldton"
            };

            State[] states = new State[6];

            states[0] = new State() { Abbreviation = "WA", StateName = "Western Australia", AreaSqrKms = 2529875, Capital = "Perth" };
            states[0].SignificantCities = WesternAustralia;
            
            states[1] = new State() { Abbreviation = "SA", StateName = "South Australia", AreaSqrKms = 983482, Capital = "Adelaide" };
            states[1].SignificantCities = new string[]
            {
                "Adelaide", "Mount Gambier", "Port Lincoln"
            };

            states[2] = new State()
            {
                Abbreviation = "QLD",
                StateName = "Queensland",
                AreaSqrKms = 1730648,
                Capital = "Brisbane",
                SignificantCities = new string[] { "Brisbane", "Sunshine Coast", "Gold Coast" }
            };

            states[3] = new State()
            {
                Abbreviation = "NSW", StateName = "New South Wales", AreaSqrKms = 800642, Capital = "Sydney",
                SignificantCities = new string[] { "Sydney", "Newcastle", "Queanbeyan" }
            };

            states[4] = new State() { Abbreviation = "VIC", StateName = "Victoria", AreaSqrKms = 227416, Capital = "Melbourne" };
            states[5] = new State() { Abbreviation = "TAS", StateName = "Tasmania", AreaSqrKms = 68401, Capital = "Hobart" };

            states[4].SignificantCities = new string[] { "Geelong", "Ballarat", "Bendigo" };

            // These are the significant cities for Tasmania
            states[5].SignificantCities = new string[4];
            states[5].SignificantCities[0] = "Devonport";
            states[5].SignificantCities[1] = "Hobart";
            states[5].SignificantCities[2] = "Strahan";

            ListViewItem lviState = null;

            for (int counter = 0; counter < states.Length - 1; counter++)
            {
                lviState = new ListViewItem((counter + 1).ToString());

                lviState.SubItems.Add(states[counter].Abbreviation);
                lviState.SubItems.Add(states[counter].StateName);
                lviState.SubItems.Add(states[counter].AreaSqrKms.ToString());
                lviState.SubItems.Add(states[counter].Capital);

                lvwCountry.Items.Add(lviState);
            }
        }
    }
}

Accessing the Property

To get the value of each element of a property that is an array type, you can apply the square brackets to the property and pass the index of the desired element.

Practical Learning: Accessing a Property of an Array Type

Access the form and add a new column to the list view as follows:

List View Columns

(Name) Text Width

colSignificantCities Significant Cities 200
Right-click the form and click View Code

To use the array property, change the code as follows:

using System.Windows.Forms;

namespace CountriesStatistics5
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();

            string[] WesternAustralia = new string[3]
            {
                "Perth", "Ellenbrook", "Geraldton"
            };

            . . .

            ListViewItem lviState = null;

            for (int counter = 0; counter < states.Length - 1; counter++)
            {
                lviState = new ListViewItem((counter + 1).ToString());

                lviState.SubItems.Add(states[counter].Abbreviation);
                lviState.SubItems.Add(states[counter].StateName);
                lviState.SubItems.Add(states[counter].AreaSqrKms.ToString());
                lviState.SubItems.Add(states[counter].Capital);
                lviState.SubItems.Add(states[counter].SignificantCities[0] + ", " + states[counter].SignificantCities[1] + ", " + states[counter].SignificantCities[2]);
                
                lvwCountry.Items.Add(lviState);
            }
        }
    }
}

To execute the application, on the main menu, click Debug -> Start Without Debugging:
Close the form and return to your programming environment
Access the form and enlarge the last column of the list view as follows:

List View Columns

(Name) Text Width

colSignificantCities Significant Cities 400
Right-click the form and click View Code

In the above code, each property had the same number of elements in the array. Fortunately, each property can have a different number of elements. For examples, change the code as follows:

using System.Text;
using System.Windows.Forms;

namespace CountriesStatistics5
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();

            string[] WesternAustralia = new string[1]
            {
                "Perth"
            };

            State[] states = new State[6];

            states[0] = new State() { Abbreviation = "WA", StateName = "Western Australia", AreaSqrKms = 2529875, Capital = "Perth" };
            states[0].SignificantCities = WesternAustralia;
            
            states[1] = new State() { Abbreviation = "SA", StateName = "South Australia", AreaSqrKms = 983482, Capital = "Adelaide" };
            states[1].SignificantCities = new string[]
            {
                "Adelaide", "Mount Gambier", "Port Lincoln"
            };

            states[2] = new State()
            {
                Abbreviation = "QLD",
                StateName = "Queensland",
                AreaSqrKms = 1730648,
                Capital = "Brisbane",
                SignificantCities = new string[] { "Brisbane", "Sunshine Coast", "Gold Coast", "Townsville", "Cairns", "Toowoomba" }
            };

            states[3] = new State()
            {
                Abbreviation = "NSW", StateName = "New South Wales", AreaSqrKms = 800642, Capital = "Sydney",
                SignificantCities = new string[] { "Sydney", "Newcastle", "Queanbeyan", "Tweed Heads", "Maitland", "Wollongong", "Albury" }
            };

            states[4] = new State() { Abbreviation = "VIC", StateName = "Victoria", AreaSqrKms = 227416, Capital = "Melbourne" };
            states[5] = new State() { Abbreviation = "TAS", StateName = "Tasmania", AreaSqrKms = 68401,  Capital = "Hobart"    };

            states[4].SignificantCities = new string[] { "Melbourne", "Geelong", "Ballarat", "Bendigo", "Wodonga" };

            // These are the significant cities for Tasmania
            states[5].SignificantCities = new string[2];
            states[5].SignificantCities[0] = "Hobart";
            states[5].SignificantCities[1] = "Launceston";

            ListViewItem lviState = null;

            for (int counter = 0; counter < states.Length - 1; counter++)
            {
                lviState = new ListViewItem((counter + 1).ToString());

                lviState.SubItems.Add(states[counter].Abbreviation);
                lviState.SubItems.Add(states[counter].StateName);
                lviState.SubItems.Add(states[counter].AreaSqrKms.ToString());
                lviState.SubItems.Add(states[counter].Capital);

                StringBuilder sbCities = new StringBuilder();

                for (int city = 0; city <= states[counter].SignificantCities.Length - 1; city++)
                    sbCities.Append(states[counter].SignificantCities[city] + ", ");

                sbCities.Remove(sbCities.Length - 2, 2);

                lviState.SubItems.Add(sbCities.ToString());
                
                lvwCountry.Items.Add(lviState);
            }
        }
    }
}

Te execute the project, on the main menu, click Debug -> Start Without Debugging:
Close the form and return to your programming environment

Arrays of Objects and Methods

Passing an Array of Objects as Argument

As done for an array of a primitive type, you can pass an array of objects as arguments. You follow the same rules we reviewed; that is, in the parentheses of a method, enter the class name, the empty square brackets, and the name of the argument. Here is an example:

public class CompanyRecords
{
    public CompanyRecords(Employee[] employees)
    {
    }
}

You can then access each member of the argument and do what you judge necessary. For example, you can display the values that the argument is holding. To call a method that takes an array of objects, in its parentheses, just enter the name of the array. Here is an example:

public class CompanyRecords
{
    public CompanyRecords(Employee[] employees)
    {
         Employees = new Employee[]
         {
             new Employee(70128, "Justine Hearson", EmploymentStatus.PartTime, 10.62),
             new Employee(24835, "Bertha Hack", EmploymentStatus.FullTime, 18.94),
             new Employee(70128, "Frank Dennison", EmploymentStatus.Seasonal, 12.48),
             new Employee(24835, "Jeffrey Arndt", EmploymentStatus.PartTime, 16.05),
         };
    }
}

public class Exercise
{
    private void Present()
    {
        Employee[] Values = new Employee[4];

        CompanyRecords records = new CompanyRecords(Values);
    }
}

As stated for arrays of primitive types, an array of objects passed as argument is treated as a reference. You can use this characteristic of arrays to initialize the array. You can also indicate that the array is passed by reference by preceding its name with the ref keyword.

Practical Learning: Passing an Array of Objects as Argument

Change the code as follows:

using System.Text;
using System.Windows.Forms;

namespace CountriesStatistics5
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();

            string[] WesternAustralia = new string[1]
            {
                "Perth"
            };

            . . .

            // These are the significant cities for Tasmania
            states[5].SignificantCities = new string[2];
            states[5].SignificantCities[0] = "Hobart";
            states[5].SignificantCities[1] = "Launceston";

            Present(states);
        }

        void Present(State[] administrations)
        {
            ListViewItem lviState = null;

            for (int counter = 0; counter < administrations.Length - 1; counter++)
            {
                lviState = new ListViewItem((counter + 1).ToString());

                lviState.SubItems.Add(administrations[counter].Abbreviation);
                lviState.SubItems.Add(administrations[counter].StateName);
                lviState.SubItems.Add(administrations[counter].AreaSqrKms.ToString());
                lviState.SubItems.Add(administrations[counter].Capital);

                StringBuilder sbCities = new StringBuilder();

                for (int city = 0; city <= administrations[counter].SignificantCities.Length - 1; city++)
                    sbCities.Append(administrations[counter].SignificantCities[city] + ", ");

                sbCities.Remove(sbCities.Length - 2, 2);

                lviState.SubItems.Add(sbCities.ToString());
                
                lvwCountry.Items.Add(lviState);
            }
        }
    }
}

To execute, press Ctrl + F5
Close the form and return to your programming environment

Returning an Array of Objects

An array of objects can be returned from a method. To indicate this when defining the method, first type the name of the class followed by square brackets. Here is an example:

public class CompanyRecords
{
    public Employee[] RegisterEmployees()
    {
    }
}

In the body of the method, you can take care of anythin you want. The major rule to follow is that, before exiting the method, you must return an array of the class indicated on the left side of the method name.

To use the method, you can simply call it. If you want, since the method returns an array, you can retrieve that list and store it in a local array for later use. Here is an example:

using System;
using static System.Environment;
using static System.Windows.Forms.MessageBox;

public enum EmploymentStatus
{
    FullTime,
    PartTime,
    Seasonal,
    Unknown
}

public class Employee
{
    public long EmployeeNumber { get; set; }
    public string EmployeeName { get; set; }
    public EmploymentStatus Status { get; set; }
    public double HourlySalary { get; set; }

    public Employee(long number, string name,
                    EmploymentStatus emplStatus, double salary)
    {
        EmployeeNumber = number;
        EmployeeName = name;
        Status = emplStatus;
        HourlySalary = salary;
    }
}

public class CompanyRecords
{
    public Employee[] RegisterEmployees()
    {
        Employee[] Employees = new Employee[]
        {
             new Employee(70128, "Justine Hearson", EmploymentStatus.PartTime, 10.62),
             new Employee(24835, "Bertha Hack", EmploymentStatus.FullTime, 18.94),
             new Employee(70128, "Frank Dennison", EmploymentStatus.Seasonal, 12.48),
             new Employee(24835, "Jeffrey Arndt", EmploymentStatus.PartTime, 16.05),
        };

        return Employees;
    }
}

public class Exercise
{
    public void Present()
    {
        CompanyRecords records = new CompanyRecords();

        Employee[] contractors = records.RegisterEmployees();
        records.PrepareRecords(ref contractors);
    }
}

Practical Learning: Ending the Lesson

Change the document as follows:

using System.Text;
using System.Windows.Forms;

namespace CountriesStatistics5
{
    public partial class Form1 : Form
    {
        public Form1()
        {
            InitializeComponent();

            State[] states = Create();

            Present(states);
        }

        void Present(State[] administrations)
        {
            ListViewItem lviState = null;

            for (int counter = 0; counter < administrations.Length - 1; counter++)
            {
                lviState = new ListViewItem((counter + 1).ToString());

                lviState.SubItems.Add(administrations[counter].Abbreviation);
                lviState.SubItems.Add(administrations[counter].StateName);
                lviState.SubItems.Add(administrations[counter].AreaSqrKms.ToString());
                lviState.SubItems.Add(administrations[counter].Capital);

                StringBuilder sbCities = new StringBuilder();

                for (int city = 0; city <= administrations[counter].SignificantCities.Length - 1; city++)
                    sbCities.Append(administrations[counter].SignificantCities[city] + ", ");

                sbCities.Remove(sbCities.Length - 2, 2);

                lviState.SubItems.Add(sbCities.ToString());
                
                lvwCountry.Items.Add(lviState);
            }
        }

        State[] Create()
        {
            string[] WesternAustralia = new string[1]
            {
                "Perth"
            };

            State[] states = new State[6];

            states[0] = new State() { Abbreviation = "WA", StateName = "Western Australia", AreaSqrKms = 2529875, Capital = "Perth" };
            states[0].SignificantCities = WesternAustralia;
            
            states[1] = new State() { Abbreviation = "SA", StateName = "South Australia", AreaSqrKms = 983482, Capital = "Adelaide" };
            states[1].SignificantCities = new string[]
            {
                "Adelaide", "Mount Gambier", "Port Lincoln"
            };

            states[2] = new State()
            {
                Abbreviation = "QLD",
                StateName = "Queensland",
                AreaSqrKms = 1730648,
                Capital = "Brisbane",
                SignificantCities = new string[] { "Brisbane", "Sunshine Coast", "Gold Coast", "Townsville", "Cairns", "Toowoomba" }
            };

            states[3] = new State()
            {
                Abbreviation = "NSW", StateName = "New South Wales", AreaSqrKms = 800642, Capital = "Sydney",
                SignificantCities = new string[] { "Sydney", "Newcastle", "Queanbeyan", "Tweed Heads", "Maitland", "Wollongong", "Albury" }
            };

            states[4] = new State() { Abbreviation = "VIC", StateName = "Victoria", AreaSqrKms = 227416, Capital = "Melbourne" };
            states[5] = new State() { Abbreviation = "TAS", StateName = "Tasmania", AreaSqrKms = 68401,  Capital = "Hobart"    };

            states[4].SignificantCities = new string[] { "Melbourne", "Geelong", "Ballarat", "Bendigo", "Wodonga" };

            // These are the significant cities for Tasmania
            states[5].SignificantCities = new string[2];
            states[5].SignificantCities[0] = "Hobart";
            states[5].SignificantCities[1] = "Launceston";

            return states;
        }
    }
}

To execute, press Ctrl + F5
Close the form and return to Microsoft Visual Studio
Close your programming environment


Previous	Copyright © 2001-2021, FunctionX	Next

(Name)	Text	Width
colSignificantCities	Significant Cities	200

(Name)	Text	Width
colSignificantCities	Significant Cities	400